Main Menu Search Advice and sales enquiries +44 (0) 20 7371 9000

The Portobello is a discreet spiked garden light fitting is ideal to subtly light foliage and low-level planting with a radiant 360° wash of light. Its unique design with a mushroom-like cap provides a warm, low glare illumination effect and disappears into the planting.

Using a 2W 2700K LED, it is an energy efficient way to add a soft illumination of warm white light to your garden. With a ground spike it is easy to install. Once installed, the Portobello will become an integral part of your garden without the need of reinstalling it seasonally, as it withstands extreme temperatures.

John Cullens’ LED Engine 40 is a mini version on our current LED Engine. Using the latest LED the new John Cullen LED engine benefits from high CRI and warm tungsten halogen like warm colour temperature.

Our AquaSquare Double Trimless LED IP Downlight is an IP54 rated downlight that is suitable for plastering into new ceilings and features a unique concealed ceiling ring for easy lamp changing.

Using a deep 25mm dual black baffle system to help reduce glare the AquaSquare Double Trimless LED downlight can tilt up to 35 degrees and rotate a full 360 degrees.

For specific specification sheets, please go to our Downloads section.

Our AquaSquare LED downlight is an IP54 rated downlight that uses an extra slim-line bezel with a deep 25mm dual black baffle system to help reduce glare.

The AquaSquare LED downlight also features a unique concealed ceiling ring for easy lamp changing. The downlight is suitable for plasterboard ceilings and can tilt up to 35 degrees and rotate a full 360 degrees.

For specific specification sheets, please go to our Downloads section.

Our AquaSquare Double LED downlight is an IP54 rated downlight that uses an extra slim-line bezel with a deep 25mm dual black baffle system to help reduce glare.

The AquaSquare Double LED downlight also features a unique concealed ceiling ring for easy lamp changing. This downlight is suitable for plasterboard ceilings and can tilt up to 35 degrees and rotate a full 360 degrees.

For specific specification sheets, please go to our Downloads section.

The AquaSquare Trimless LED downlight is an IP54 rated downlight that uses a deep 25mm dual black baffle system to help reduce glare and therefore allow the fitting to be plastered into new ceilings.

The fitting features a unique concealed ceiling ring for easy lamp changing. The AquaSquare Trimless can tilt up to 35 degrees and also rotate a full 360 degrees.

For specific specification sheets, please go to our Downloads section.

John Cullens’ LED Engine 50+ is a high lumen output version on our current LED Engine. Using the latest LED the new John Cullen LED engine benefits from high CRI and warm tungsten halogen like warm colour temperature.

Mains dimmable constant voltage driver for outdoor use

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via mains connection.

Mains dimmable constant voltage driver for outdoor use

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via mains connection.

Mains dimmable constant voltage driver for outdoor use

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via mains connection.

Mains dimmable constant voltage driver for indoor use

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via mains connection.

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via mains connection.

Current rated 1 channel DALI dimmable constant voltage driver for indoor use for use with current rated LED products. Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via mains connection.

Current rated DALI dimmable driver 700mA for indoor use for use with current rated LED products.

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via mains connection.

Current rated DALI dimmable driver 350mA for indoor use for use with current rated LED products. Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via mains connection.

Launching our new Syon, a miniature interior/exterior spotlight which is ideal for use both inside the home and out. Its diminuitive size makes it easy to conceal yet it packs a punch with a narrow beam of warm white light. Using a 1w 2700K LED, it is an energy efficient way to add pinspots of light to interior and exterior features.

The Syon can be used in areas where you can’t recess fittings such as concrete ceilings or beams in a barn. Being IP55, this versatile fitting can be used outside to spotlight a table, planting or skimming light down a wall or trellis

To learn more about the development and concept of this product, read our Product Insight to the Syon here.

Visit our Project Showcase for inspiration.

Switched constant voltage driver for outdoor use for use with current rated LED products.

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via switched connection.

Switched constant voltage driver for outdoor use for use with current rated LED products.

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via Switched connection.

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications.

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via 1 – 10V connection.

Close
Loading...
Loading...