Main Menu Search Advice and sales enquiries +44 (0) 20 7371 9000

Our AquaSquare Double Trimless LED IP Downlight is an IP54 rated downlight that is suitable for plastering into new ceilings and features a unique concealed ceiling ring for easy lamp changing.

Using a deep 25mm dual black baffle system to help reduce glare the AquaSquare Double Trimless LED downlight can tilt up to 35 degrees and rotate a full 360 degrees.

For specific specification sheets, please go to our Downloads section.

Our AquaSquare LED downlight is an IP54 rated downlight that uses an extra slim-line bezel with a deep 25mm dual black baffle system to help reduce glare.

The AquaSquare LED downlight also features a unique concealed ceiling ring for easy lamp changing. The downlight is suitable for plasterboard ceilings and can tilt up to 35 degrees and rotate a full 360 degrees.

For specific specification sheets, please go to our Downloads section.

Our AquaSquare Double LED downlight is an IP54 rated downlight that uses an extra slim-line bezel with a deep 25mm dual black baffle system to help reduce glare.

The AquaSquare Double LED downlight also features a unique concealed ceiling ring for easy lamp changing. This downlight is suitable for plasterboard ceilings and can tilt up to 35 degrees and rotate a full 360 degrees.

For specific specification sheets, please go to our Downloads section.

The AquaSquare Trimless LED downlight is an IP54 rated downlight that uses a deep 25mm dual black baffle system to help reduce glare and therefore allow the fitting to be plastered into new ceilings.

The fitting features a unique concealed ceiling ring for easy lamp changing. The AquaSquare Trimless can tilt up to 35 degrees and also rotate a full 360 degrees.

For specific specification sheets, please go to our Downloads section.

Current rated DALI dimmable driver 700mA for indoor use for use with current rated LED products.

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via mains connection.

Current rated 1-10 V dimmable driver 700mA for indoor use for use with current rated LED products.

Our range of drivers and products are tried and tested for compatibility under normal use. No responsibility can be accepted for compatibility of drivers and products, other than those specified in our written specifications. Always check dimension of drivers to ensure the power supply will fit through cut-out or into area intended for installation via mains connection.

Our Mira low profile LED downlight uses an extra slim-line bezel with a dual black baffle system to help reduce glare. This light fitting also features a unique concealed ceiling ring for easy lamp changing. This LED downlight is suitable for plasterboard ceilings and marine lighting. The Mira LED downlight can tilt up to 10 degrees. Our downlight produces a warm LED light that is identical to Tungsten Halogen.

For inspiration with LED downlights please see our project showcase. Visit our showroom for a demonstration and details of our lighting design service.

This fittings comes with two plaster-in accessories, both recessed and flush, which allows for a more contemporary look.

For specific specification sheets, please go to our Downloads section.

The Etta is a precision engineered LED under cabinet light that can also be used for recessed task and display lighting. Is it suitable for under shelf lighting, bespoke cabinetry, kitchens and marine lighting.

The Etta is available in white, bronze or aluminium and can also come with a Surface Mount Collar in white, bronze or aluminium.

The Etta under cabinet light is also available with an Eyelid, view more information on this product by clicking here.

Why not take a look at how these products can work in a kitchen? Click here to look at kitchen lighting design inspiration.

Etta EyelidThe Etta Eyelid is a precision engineered low glare LED under cupboard light that can also be used for recessed task and display lighting.

Is it suitable for under shelf lighting, bespoke cabinetry, kitchens and marine lighting.

The Etta Eyelid is available in white, bronze or aluminium and can also come with a Surface Mount Collar in white, bronze or aluminium.

The Etta is also available without an Eyelid, view more information on this product by clicking here.

Why not take a look at how these products can work in a kitchen? Click here to look at kitchen lighting design inspiration.

The LED Picture Light combines energy efficiency with excellent colour rendition. It has a minimum profile so as to not distract the eye from the art.

Available in a wide range of finishes and sizes, the elegant fitting offers the perfect solution to evenly lighting artwork in both contemporary and traditional interiors.

With its warm white light of 2700K and a high CRI (Colour Rendition Index) of 95, it is an LED picture light that genuinely brings colours to life accurately. The LED Picture Light also gives no forward heat and no infrared or ultraviolet rays.

For inspiration with the LED Picture Light, please see our project showcase or visit our showroom for a demonstration and details of our lighting design service.

Our Eden Wall Washer uses a deep black baffle to reduce glare. This fitting is ideal for use in areas such as living areas, hallways, kitchens and dining rooms, as well as other key areas of the home and is ideal for use on beams and concrete ceilings where recessed fittings are unsuitable.

The Eden Wall Washer can be angled up to 90 degrees and rotated a full 360 degrees.

For inspiration with wall washers please see our project showcase.

John Cullens’ LED engine designed, engineered and manufactured in the UK is at the forefront of LED technology. Using the latest LED the new John Cullen LED engine benefits from high CRI and warm tungsten halogen like warm colour temperature.

 

This LED garden floodlight is suitable for highlighting a pathway or angled towards shrubs and walls for soft wash of light to planting.

The fittings colour and size ensures it disappears into planting.

This LED garden spotlight is suitable for highlighting any feature or shrub in a patio or garden. The green colour and small size of the fitting ensures it disappears into planting.

The LED Torino is an interior and exterior uplight which can be used to create uplighting effects to columns, arches, walls etc. Particularly suitable for skimming light over stone or wooden steps. Suitable for areas of light pedestrian traffic and marine lighting.  It also can be used in wet environments such as a bathroom.

For a smaller LED uplight, see the Lucca or Luccini.

The Waterspring IP54 LED downlight is an ideal bathroom downlight with an extra slim-line bezel with a deep 25mm black baffle to reduce glare. The Waterspring is waterproof and can be used in wet areas such as Bathrooms, Shower rooms etc. This IP rated LED downlight is also suitable for marine lighting and as an outdoor downlight. This LED downlight produces a warm LED light that is identical to Tungsten Halogen.

Please note: This product is a fixed downlight and therefore does not tilt. For a tilting waterproof bathroom ceiling light, please see our Aquabeam.

The LED downlight is only suitable for plasterboard ceilings. This fitting comes with two plaster-in accessories, both recessed and flush, for a more contemporary look.

For inspiration with LED downlights please see our project showcase or visit our showroom for a demonstration and details of our lighting design service.

If you are unsure of the IP Zones in a bathroom, take a look at our handy guide: Bathroom IP Rating and Zones.

For specific specification sheets, please go to our Downloads section.

Our Square Double Trimless LED downlight is suitable for plastering into new ceilings and features a unique concealed ceiling ring for easy lamp changing.

Using a deep 25mm dual black baffle system to help reduce glare the Square Double Trimless LED downlight can tilt up to 35 degrees and rotate a full 360 degrees.

For inspiration with downlights please see our project showcase or for further details of our lighting design service, see here.

For specific specification sheets, please go to our Downloads section.

The Square Trimless LED downlight uses a deep 25mm dual black baffle system to help reduce glare and therefore allow the fitting to be plastered into new ceilings. The fitting features a unique concealed ceiling ring for easy lamp changing. The Square Trimless can tilt up to 35 degrees and also rotate a full 360 degrees.

Click here to find out how our designers use this product.

For specific specification sheets, please go to our Downloads section.

Our Square Double LED downlight uses an extra slim-line bezel with a deep 25mm dual black baffle system to help reduce glare.

The Square Double LED downlight also features a unique concealed ceiling ring for easy lamp changing. This downlight is suitable for plasterboard ceilings and can tilt up to 35 degrees and rotate a full 360 degrees.

For inspiration with LED downlights please see our project showcase, or you can visit our showroom for a full demonstration and details of our lighting design service.

For specific specification sheets, please go to our Downloads section.

Our Square LED downlight uses an extra slim-line bezel with a deep 25mm dual black baffle system to help reduce glare.

The Square LED downlight also features a unique concealed ceiling ring for easy lamp changing. The downlight is suitable for plasterboard ceilings and can tilt up to 35 degrees and rotate a full 360 degrees.

For inspiration with LED downlights please see our project showcase, or you can visit our showroom for a full demonstration and details of our lighting design service.

For specific specification sheets, please go to our Downloads section.

Close
Loading...
Loading...