Main Menu Search Advice and sales enquiries 020 7371 9000

Precision engineered single piece cowled LED under cupboard light. Suitable for under shelf lighting, bespoke cabinetry and marine lighting.

The LED is binned to 2 Step MacAdam Ellipses to ensure consistency when specified with multiple products.

 

The Waterspring IP54 LED downlight is an ideal bathroom ceiling light with an extra slim-line bezel with a deep 25mm black baffle to reduce glare. The Waterspring is waterproof and can be used in wet areas such as Bathrooms, Shower rooms etc. This IP rated LED downlight is also suitable for marine lighting and as an outdoor downlight. This LED downlight produces a warm LED light that is identical to Tungsten Halogen.

Please note: This product is a fixed downlight and therefore does not tilt. For a tilting waterproof bathroom ceiling light, please see our Aquabeam.

The LED downlight is only suitable for plasterboard ceilings. The LED downlight is designed in-house and manufactured in the UK. The full range of John Cullen light fittings are designed to match each other. This product has been independently tested at a BSI registered laboratory.

For inspiration with LED downlights please see our project showcase or visit our showroom for a demonstration and details of our lighting design service.

This fitting comes with two plaster-in accessories, both recessed and flush, for a more contemporary look.

If you are unsure of the IP Zones in a bathroom, take a look at our handy guide: Bathroom IP Rating and Zones.

Our Square Double Trimless LED downlight is suitable for plastering into new ceilings and features a unique concealed ceiling ring for easy lamp changing.

Using a deep 25mm dual black baffle system to help reduce glare the Square Double Trimless LED downlight can tilt up to 35 degrees and rotate a full 360 degrees.

The LED downlight produces a warm LED light that is identical to Tungsten Halogen.

This downlight has been designed in-house and manufactured in the UK and has been independently tested at a BSI registered laboratory.

Also available in a single Square Trimless version.

For inspiration with downlights please see our project showcase or for further details of our lighting design service, see here.

The Square Trimless LED downlight uses a deep 25mm dual black baffle system to help reduce glare and therefore allow the fitting to be plastered into new ceilings. The fitting features a unique concealed ceiling ring for easy lamp changing. The Square Trimless can tilt up to 35 degrees and also rotate a full 360 degrees. This LED downlight produces a warm LED light that is identical to Tungsten Halogen.

This LED downlight is designed in-house and manufactured in the UK. All light fittings in this range have been designed to match each other.  Also available in a Square Double Trimless version.

Click here to find out how our designers use this product.

If you are looking for round trimless downlights, we now have two accessories – a recessed and flush –  which can be added to our round downlights to give them this more contemporary feel.

Our Square Double LED downlight uses an extra slim-line bezel with a deep 25mm dual black baffle system to help reduce glare.

The Square Double LED downlight also features a unique concealed ceiling ring for easy lamp changing.

This downlight is suitable for plasterboard ceilings and can tilt up to 35 degrees and rotate a full 360 degrees.

The Square Double LED downlight has been designed in-house, manufactured in the UK. This product has been independently tested at a BSI registered laboratory.

Also available as a single Square version.

For inspiration with LED downlights please see our project showcase, or you can visit our showroom for a full demonstration and details of our lighting design service.

Our Square LED downlight uses an extra slim-line bezel with a deep 25mm dual black baffle system to help reduce glare. The Square LED downlight also features a unique concealed ceiling ring for easy lamp changing. The downlight is suitable for plasterboard ceilings and can tilt up to 35 degrees and rotate a full 360 degrees. This LED downlight produces a warm LED light that is identical to Tungsten Halogen.

The Square LED downlight has been designed in-house, manufactured in the UK. The full range of John Cullen light fittings have been designed to match each other. This product has been independently tested at a BSI registered laboratory.  Also available as a Square Double version and single Trimless and Double Trimless versions.

For inspiration with LED downlights please see our project showcase, or you can visit our showroom for a full demonstration and details of our lighting design service.

The Polespring is a dimmable LED downlight with an extra slim-line bezel. Due to the Polespring’s deep 25mm dual black baffle system, the LED can be recessed into the ceiling, therefore reducing glare.

The Polespring also features a unique concealed ceiling ring for easy lamp changing. This LED downlight can tilt up to 35 degrees allowing the Polespring to be angled to reflect off walls and cupboards. As a result, the downlight is ideal for lighting your artwork. It produces a warm 2700 Kelvin LED light identical to tungsten halogen. With a high CRI of up to 90, it will reveal the true colours of its focus.

The Polespring is suitable for plasterboard ceilings and marine lighting.

The Polespring is available in three beam widths – narrow, medium and wide, and the lamp is replaceable.

This fitting also comes with two plaster-in accessories, recessed and flush, giving the fitting a more contemporary look.

Visit our project showcase for more inspiration.

The Flush directional LED downlight uses an extra slim-line bezel with a deep 25mm dual black baffle system to help reduce glare. The light fitting also features a unique concealed ceiling ring for easy lamp changing. This directional LED downlight is suitable for plasterboard ceilings and marine lighting.

The Flush directional LED downlight can tilt up to 35 degrees and produces a warm LED light that is identical to Tungsten Halogen.

This LED downlight is designed in-house and manufactured in the UK. The full range of John Cullen light fittings are designed to match each other.

This fitting comes with two plaster-in accessories, both recessed and flush, for a more contemporary look.

For inspiration with LED downlights please see our project showcase. Visit our showroom for a demonstration and details of our lighting design service.

 

Our Aquabeam IP rated LED downlight uses an extra slim-line bezel and has a deep 25mm black baffle to reduce glare. This fitting is waterproof which makes it suitable for wet areas such as Bathrooms, Shower rooms etc. The LED downlight produces a warm LED light that is identical to Tungsten Halogen. This LED downlight is only suitable for plasterboard ceilings. The Aquabeam LED downlight can tilt up to 35 degrees. For a fixed waterproof product, see our Waterspring LED downlight

Our IP rated LED downlight has been designed in-house and manufactured in the UK. The full range of John Cullen light fittings have been designed to match each other. A BSI registered laboratory has independently tested this full range of fittings.

For inspiration with LED downlights, browse our project showcase. You can also visit our showroom for a demonstration and details of our lighting design service.

This fitting comes with two plaster-in accessories, both recessed and flush, for a more contemporary look.

If you are unsure of the IP Zones in a bathroom, take a look at our handy guide: Bathroom IP Rating and Zones.

Our Polespring 360 LED downlight uses an extra slim-line bezel with a deep 25mm dual black baffle system to help reduce glare. This LED downlight also features a magnetic ceiling ring for easy lamp changing.

The fitting is suitable for all ceiling types including lathe and plaster and is also suitable for marine lighting. The fitting can tilt up to 35 degrees and rotate a full 360 degrees. The downlight produces a warm LED light that is identical to Tungsten Halogen.

The Polespring 360 LED downlight is designed in-house and manufactured in the UK. The full range of John Cullen light fittings are designed to match each other. This product has also been independently tested at a BSI registered laboratory.

This fittings comes with two plaster-in accessories, both recessed and flush, for a more contemporary look.

For inspiration with LED downlights please visit our project showcase, or drop by our showroom for a free demonstration and details of our lighting design service.

 

This external LED uplight can be used as an uplight or recessed into a wall to provide a wash of light along paths or steps and is ideal for use in wet areas such as a bathroom or for marine lighting. It is also suitable to create a wash of light up low level walls, and across decking or patios.

The LED lamp in this external LED uplight is set back from the lamp front to reduce glare.

The Lucca LED uplight is also available as an internal version.

NB: This fitting has a new cut-out of 47mm.

The Oslo external LED steplight is designed to provide a wash of light to steps and pathways outside or in wet environments. The Olso comes in a Stainless Steel colour with an extra wide beam width and is 2700K in colour temperature.

For inspiration with LED steplights please see our project showcase.

The Oslo LED steplight is also available as an internal version for use in dry areas.

If you are unsure of the IP Zones in a bathroom, take a look at our handy guide: Bathroom IP Rating and Zones.

The Oslo Steplight is an energy efficient LED square step light providing low glare lighting at low level to stair treads and corridors or can be recessed upside down at high level as an uplight.

It comes in a variety of finishes that includes white, bronze, bright chrome, stainless steel, RAL match, or primed.

For inspiration with LED steplights please see our project showcase or visit our showroom for a demonstration and details of our lighting design service.

The Oslo LED steplight is also available as an external version which is suitable for use outside or in wet areas.

The Manhattan is an energy efficient LED steplight ideal for contemporary step washing. Back box is included.

This fitting is not glass-fronted.

For inspiration with LED steplights please see our project showcase or visit our showroom for a demonstration and details of our lighting design service.

The Cazalla is an energy efficient LED miniature steplight designed to provide low glare lighting to stair treads and corridors. It is a versatile product and can also be used upside down at a high level to become an uplight.

As this fitting is not glass-fronted, it is suitable for marine lighting.

The Cazalla is available in a variety of finishes; white, bronze, bright chrome, stainless steel and primed to suit any style in your home.

Visit our corridors and stairs project showcase, for more inspiration on how to use steplights.

Close
Loading...
Loading...